Elysis RF Laser [Powerful Needle RF Skin Texture Care]

Elysion Needle Fractional RF

Our goal is to minimize discomfort during treatment while achieving focused improvement for your skin concerns.

Elysion RF is a procedure that delivers high-frequency energy to the dermal layer by closely applying microneedles to the skin.

This device allows selective adjustment of 1MHz and 2MHz frequencies. It also features a 49-pin non-insulated tip and a dual-depth insulated structure.

By utilizing these various functions, we can plan applications tailored to different skin concerns.

What makes the Elysion RF treatment method noteworthy?

1) Non-Insulated 49-Pin Tip: Provides dense stimulation to help with efficient area management.

The non-insulated tip can be considered for pore and acne scar management.

With a single treatment action, multiple electrodes stimulate the dermis broadly and densely. 

As a result, the density of micro-coagulation zones (areas slightly coagulated and contracted by heat) increases, which can positively impact pore and skin texture improvement.

This contributes to delivering effective stimulation while considering treatment time and pain burden.

2) Insulated Dual-Depth (2-depth) Structure: Continuously delivers energy to two depths with a single treatment.

The insulated tip can be considered for fine lines and lifting effects.

Elysion's insulated tip uses a method that continuously delivers energy to two different depths with just one needle insertion.

This protects the epidermis, reducing recovery burden, and simultaneously allows for skin remodeling through collagen rearrangement in the deeper layers.

3) 1MHz·2MHz Frequency Selection Function

1MHz (Low-Frequency Range): This frequency is effective at delivering current deep into the skin. Therefore, it can be considered for concerns such as lifting, elasticity improvement, deep wrinkles, enlarged pores, and scar bases.

2MHz (Relatively High-Frequency Range): This frequency primarily acts on the epidermis to the upper dermal layer. It can help with sebum gland regulation, pore edge management, fine lines, skin surface texture, and redness improvement.

Therefore, in a single treatment, 1MHz (deep layer) and 2MHz (superficial layer) frequencies can be applied sequentially according to the situation, allowing for efficient treatment.

4) Treatment with 350+ Shots

For a typical facial area with 2 passes, approximately 300 shots are used, and we strive to apply an additional 50 shots or more to key areas of concern, totaling over 350 shots.

Thanks to its 49-pin tip and dual-depth function, Elysion treatment aims for focused skin improvement while minimizing pain burden.

5) Precise Diagnosis → Overlap Design → Skinbooster Layering Integration

Using the Mark-Vu diagnostic device, we quantitatively analyze conditions such as sebum, pores, wrinkles, pigmentation, and redness. For areas with pores and scars, or accompanied by sebum and redness, we approach by sequentially applying 2MHz (surface and upper layer) and 1MHz (deep layer) frequencies to the same location.

Following this, we apply a skinbooster layering method tailored to each individual's skin concerns (from Stage 1 to Stage 3), expecting improved absorption and synergistic effects of active ingredients.

Treatment Protocol

1) Precise Skin Analysis (Mark-Vu) → Diagnosis Map Creation

Acne: We analyze sebum gland activity, residual inflammation, redness distribution, etc., to devise a treatment plan. We combine the application of a non-insulated tip (for sebum/pore management) and 2MHz frequency (for redness management).

Acne Scars: We categorize and approach different types such as boxcar, rolling, and red scars. 1MHz frequency (deep layer) and a non-insulated tip (surface resurfacing) can be applied in an overlapping manner.

Treatment is customized by adjusting the frequency (Hz) and selecting either non-insulated or insulated methods according to skin concerns and lesion characteristics.

2) Shot and Pass Design is Planned Based on 350+ Shots.

When performing a 2-pass treatment on the entire face, approximately 300 shots are generally used.

Areas of concern are treated with 50 or more overlapping shots.(Overlap)

1MHz and 2MHz frequencies are used selectively according to the treatment area and type of lesion.

3) Skinbooster Layer-by-Layer Application (3 Stages)

1st Stage (Surface Layer): Focuses primarily on concerns such as pores, pigmentation, and redness in the skin's surface layer.

2nd Stage (Dermal Layer): Helps promote collagen production for improved fine lines and scars.

3rd Stage (Intensive Overlap): Concentrates energy re-application on areas with multiple overlapping concerns, and allows highly concentrated ingredients to penetrate deeply.

4) Overlap Treatment Design for Complex Skin Concerns (Example)

Pores and Acne: We can plan treatment by first using the non-insulated 49-pin tip and 2MHz(sebum/surface texture), followed by the insulated 1MHz(deep layer).

Scars and Redness: Insulated 1MHz(for scar areas) can be used for treatment, and 2MHz(for redness stabilization) can be considered together.

Fine Lines and Acne Scars: 2MHz(for fine lines/skin texture) can be utilized, and Non-insulated 49-pin(for uniform improvement of the upper dermis) treatment may be beneficial.

The principle of Elysus RF Laser treatment is as follows.

Needle RF delivers high-frequency energy to the desired layer of the skin through micro-needles, thereby supporting skin reconstruction treatment.

After Needle RF treatment, micro-coagulation zones may form where the needles have passed.

These coagulation zones activate fibroblasts, inducing collagen and elastin regeneration.

Non-insulated method broadly stimulates from the epidermis to the upper dermis, while the insulated method precisely delivers energy to the target layer at a specific desired depth.

Elysus's Dual Deeps Insulated Technology delivers energy to two depths in one treatment, which is advantageous for reducing recovery burden while supporting structural changes in the skin.

Elysus Sense RF: Equipment and Tip Features

Non-insulated 49-pin Tip: Thermal energy is delivered throughout the needle, stimulating from the skin surface to the upper dermis broadly and uniformly. This can help with pores, excessive sebum, and shallow scars, among others. 49 pins have the advantage of increasing the density of effective stimulation within the same number of shots compared to a standard 25-pin tip.

Insulated Dual Deeps Tip: Heat is generated only at the tip of the needle, and energy is continuously delivered to two depths with a single penetration. This can contribute to protecting the epidermis while helping structural changes in deeper skin layers.

Adjustable Length Needle (utilizing Agnes-style targeting): Depending on skin thickness or treatment area, the depth can be delicately adjusted in 0.x mm increments. This makes it possible to selectively treat specific tissues such as sebaceous glands, sweat glands, under-eye fat, etc.

Expected Benefits.

1) Skin lifting and elasticity improvement is aided, and improvement of deep and shallow wrinkles can be expected.

2) Pore reduction can be expected, and it can contribute to controlling sebum secretion, positively influencing the skin's oil-water balance, and improving skin surface texture.

3) Alleviation of acne scars (pitted marks, redness)

4) Improvement of facial redness and uneven skin tone

5) Helps stabilize the environment for pigmentation such as melasma(melasma recurrence management)

Those for whom this treatment is deemed suitable

1) Those concerned about pitted acne scars (rolling or boxcar type) or red marks

2) Those experiencing discomfort due to enlarged pores, uneven skin texture, excessive sebum secretion, and frequent breakouts

3) Those who notice fine lines on their skin or feel that their skin elasticity has decreased

4) Those concerned about easily reddening rosacea or sensitive skin, and recurrent pigmentation issues

5) Those seeking efficient improvement with fewer treatment sessions, and interested in per-shot efficiency and frequency matching

Procedure Steps

1) After cleansing and photography for skin condition assessment, an initial consultation using Mark-Vu and a detailed consultation with medical staff will proceed.

2) Customized treatment parameters such as depth, power, mode, passes, overlap, and frequency are designed considering individual skin characteristics.

3) If necessary, Needle RF 2-pass treatment with over 350 shots will be performed, and overlap techniques can be applied to areas of concern.

4) Depending on your individual condition, skin booster layering techniques (staged application) may also be performed in conjunction.

5) After the procedure, we use a Jaungo modeling mask to soothe the heat sensation of your skin.

Precautions and Possible Side Effects After the Procedure

Redness and Swelling: Typically, these subside within 6 hours after the procedure, but individual differences may cause them to last for 2-3 days.

Tiny Scabs: Tiny scabs may form on the treated area, and you should wait for them to fall off naturally. Do not pick them off forcibly.

Activities to avoid for 3-4 days after the procedure: It is best to refrain from activities such as saunas, jjimjilbangs (Korean bathhouses), swimming, drinking alcohol, smoking, and strenuous exercise.

Recommended Post-Procedure Care: Adequate sun protection, consistent moisturizing, and sufficient hydration are important.

Temporary Symptoms that may appear: Occasionally, temporary issues such as skin trouble, itching, stinging, or bruising may occur after the procedure.